Yueqing Sandi Electric Co.,Ltd
Products
Transformer Testers

Transformer Testers

Yueqing Sandi Electric Co.,Ltd is one of the leading China transformer testers manufacturers, welcome to wholesale cheap transformer testers from our professional factory. Transformer testers Description Sandi VLF stands for Very Low Frequency. A Sandi VLF is an AC output high voltage...

    Yueqing Sandi Electric Co.,Ltd is one of the leading China transformer testers manufacturers, welcome to wholesale cheap transformer testers from our professional factory.

    Transformer testers

    Description 

    Sandi VLF stands for Very Low Frequency. A Sandi VLF is an AC output high voltage instrument. Sandi VLF products provide sinusoidal AC voltage but at 0.1Hz - 0.02 Hz, compared to the 50/60Hz output of conventional AC test sets. It is still an AC voltage with sinusoidal polarity reversals every half cycle. The Sandi VLF instrument is used to provide a simple go/no-go, or pass/fail withstand test. Also, Sandi VLF instruments can be used as the voltage source for performing off-line Partial Discharge testing.


    Application

    Sandi VLF testing is used for any application requiring AC testing of high capacitance loads. The major application is for testing solid dielectric cable, followed by testing large rotating machinery, and occasionally for testing large insulators, arrestors, and the like. Even if a utility doesn’t adopt Sandi VLF for widespread cable testing, one of the best reasons to use VLF is to check installation quality and accessories, like splices. Many failures are due to damage during installation, improper workmanship, and/or insulation damage caused by excessive voltage fault locating - thumping. At the very least, every newly installed or repaired cable should be Sandi VLF tested before re-energizing.


    Benefits of Sandi VLF

    1,Portable and affordable.

    2,All models feature is true sine wave output.

    3,Waveform is independent of load capacitance between 0.01mF and maximum load.

    4,Highest load ratings available.

    5,Highest voltage models available.

    6,Simple and easy operation.

    7,AC testing does not degrade good cable insulation.

    8,Harmful space charges are not injected into the cable insulation.

    9,No traveling waves are generated during testing.

    10,Rugged and reliable design less prone to failure from transients.

    11,No polarization effects as with DC.

    12,Breakdown detection.

    13,Reporting

    14,Display: The 7 'capacitive touch screen, the screen displays real-time measurement data and the output waveform.

    15,Comprehensive protection: high, low pressure side of the over voltage and over-current protection, rapid response action (action time 10ms).

    16,Small size, light weight: very conducive to outdoor work.

    17,Communication interface: USB2.0.


    Supplied Accessories

    1.A dedicated high voltage-voltage connecting cable;

    2.A dedicated low-voltage connecting cable;

    3.A power line;

    4.Ten power fuse;

    5.A discharge stick;

    6.An instruction manual.

    The main technical parameter

    Model

    Output Peak voltage

    Measuring range

    Weight

    Applications

    SVLF-30

    30KV

    0.1Hz≥1.1µF

    Controller: 4 kg

    Booster: 25 kg

     

    10KV and below voltage cables,generator

    0.05Hz≥2.2µF

    0.02Hz≥5.5µF

    SVLF-40

    40KV

    0.1Hz≥1.1µF

    Controller: 4 kg

    Booster: 45 kg

     

    13.8KV and below voltage cables,generator

    0.05Hz≥2.2µF

    0.02Hz≥5.5µF

    SVLF-50

    50KV

    0.1Hz≥1.1µF

    Controller: 4 kg

    Booster: 45 kg

     

    15KV and below voltage cables, generator

    0.05Hz≥2.2µF

    0.02Hz≥5.5µF

     

    SVLF-60

     

    60KV

     

    0.1Hz≥1.1µF

    Controller: 4 kg

    First Booster:25 kg

    Second Booster:45 kg

     

    20KV and below voltage cables, generator

    0.05Hz≥2.2µF

    0.02Hz≥5.5µF

     

    SVLF- 80

     

    80KV

    0.1Hz≥1.1µF

    Controller: 4 kg

    First Booster:25 kg

    Second Booster:45 kg

     

    35KV and below voltage cables, generator

    0.05Hz≥2.2µF

    0.02Hz≥5.5µF

    Packing&Service: 

    1.Packing: Package of transformer tester is Wooden Box/ Metal Box.

    2.Accept MOQ(1pcs of transformer tester is available) and OEM

    3.Country of origin: China

    4.Terms of Payment: T/T, Western Union, Paypal, L/C.


    Hot Tags: transformer testers, China, manufacturers, factory, wholesale, cheap

    Product Categories

    Fast Track

    • Feedback
      Yueqing Sandi Electric Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: Lvao Industrial Zone, Yueqing city, Zhejiang province 325604, China.
      Tel: +86-577-62793760    
      Fax: +86-577-27873806    
      E-mail: carrie@sandi.cc
    Copyright © Yueqing Sandi Electric Co.,Ltd